How to Order Single Strings

After you have received the Arledge Measuring Kit, use the Arledge tape measure.
Pull enough tape to equal the length of the piano and lock it.
Thread the tape from the front under any plate struts along the string towards the hitch pin.
Carefully finesse the tape under the damper felt.
Place the tape measure eye around the hitch pin and gently pull the slack.
The tape should run unobstructed along the length of the string.
The tape measure will remain anchored on the respective hitch pin of each string for the distance measurements.
To print both pages of the order form; CLICK HERE. To email your single string order, CLICK HERE.

Now that you have printed the Single Strings Order Form pages, you are ready to measure!

If you would like to print these instructions, CLICK HERE.

If you are not certain how to make metric measurements, CLICK HERE .

For each string's measurements:

1) Measure from the hitch pin to the center of the speaking or front bridge pin of the string.

2) Measure from the hitch pin to the center of the agraffe of the string. 3) Measure from the hitch pin to the top of the tuning pin of the string.

Click here to continue with instructions >>